Filter
Top Products
22
Using the Projector
Information
This is a read-only menu that provides status on the projector and
input source.
SUBMENU FUNCTION
Lamp Timer Shows the number of hours the lamp has been in use.
Input Signal Shows the Input Source: Computer or Video or S-Video
Rev. Shows the revision of software in the projector.
H-Sync Shows the Horizontal sync frequency of the input source.
V-Sync Shows the Vertical sync frequency of the input source.
Resolution Shows the image resolution of the computer source.
Signal Type Shows either NTSC, PAL, or SECAM (video source only)
Lamp Timer 1H
Input Signal
Computer Video S-Video
Rev. 1.05
H-Sync 75.00kHz
V-Sync 60.00Hz
Resolution 1280x1024
Exit
INFORMATION