Filter
Top Products
Intel Desktop Board D101GGC Product Guide
44
Setting the BIOS Configuration Jumper
NOTE
Always turn off the power and unplug the power cord from the computer before changing the
jumper. Moving the jumper with the power on may result in unreliable computer operation.
Figure 23 shows the location of the desktop board’s BIOS configuration jumper block.
OM18222
1
3
2
BR1
Figure 23. Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block enables all board configuration to be done in the BIOS Setup
program. Table 9 shows the jumper settings for the Setup program modes.