Filter
Top Products
Installing and Replacing Desktop Board Components
25
Installing the Desktop Board
Refer to your chassis manual for instructions on installing the desktop board. Six screws secure
the desktop board to the chassis. Figure 5 shows the locations of the mounting screw holes.
✏
NOTES
You will need a Phillips
†
(#2 bit) screwdriver.
Refer to Appendix B for regulatory requirements and installation instructions and precautions.
CAUTION
Only qualified technical personnel should attempt this procedure. Disconnect the computer from
its power source before performing the procedures described here. Failure to disconnect the
power before you open the computer can result in personal injury or equipment damage.
OM12555
Figure 5. Location of the Mounting Screw Holes