Filter
Top Products
Intel Desktop Board D815EGEW Product Guide
34
Setting the BIOS Configuration Jumper Block
CAUTION
Always turn off the power and unplug the power cord from the computer before changing the
jumper. Moving the jumper with the power on may result in unreliable computer operation.
The location of the board’s BIOS configuration jumper block, labeled C6D6, is shown in
Figure 17.
OM12560
1
3
C6D6
Figure 17. BIOS Configuration Jumper Block Location
This three-pin jumper block, shown in Figure 17, enables all desktop board configurations to be
done in BIOS Setup. Table 6 shows the jumper settings for the Setup program modes.
Table 6. Jumper Settings for the BIOS Setup Program Modes
Function/Mode Jumper Setting Configuration
Normal
1-2
3
1
The BIOS uses current configuration information and passwords
for booting.
Configure
2-3
3
1
After the POST runs, Setup runs automatically. The maintenance
menu is displayed.
Recovery
None
3
1
The BIOS attempts to recover the BIOS configuration. A recovery
diskette is required.