Filter
Top Products
Using the Setup Program
51
Boot Configuration Submenu
To access this submenu, select Advanced on the menu bar, then Boot Configuration.
Maintenance Main
Advanced
Security Power Boot Exit
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
Video Configuration
The features shown in Table 16 are for setting Plug and Play (PnP) options, resetting configuration
data, and the power-on state of the Numlock key.
Table 16. Boot Configuration Submenu
Feature Options Description
Plug & Play O/S
• No (default)
• Yes
Specifies if manual configuration is desired.
No lets the BIOS configure all devices. This setting is
appropriate when using a Plug and Play operating system.
Yes lets the operating system configure Plug and Play devices
not required to boot the system. This option is available for use
during lab testing.
Reset Config Data
• No (default)
• Yes
No does not clear the PCI/PnP configuration data stored in
flash memory on the next boot.
Yes clears the PCI/PnP configuration data stored in flash
memory on the next boot.
Numlock • Off
• On (default)
Specifies the power-on state of the Numlock feature on the
numeric keypad of the keyboard.