Filter
Top Products
Using the Setup Program
53
Table 17. Peripheral Configuration Submenu (continued)
Feature Options Description
Base I/O Address
(This feature is present
only when Parallel Port
is set to Enabled)
• 378 (default)
• 278
• 228
Specifies the base I/O address for the parallel port.
Interrupt
(This feature is present
only when Parallel Port
is set to Enabled)
• IRQ 5
• IRQ 7 (default)
Specifies the interrupt for the parallel port.
DMA Channel
(This feature is present
only when Parallel Port
Mode is set to ECP)
• 1
• 3 (default)
Specifies the DMA channel.
Audio Device • Disabled
• Enabled
(default)
Enables or disables the onboard audio subsystem.
LAN Device
(This feature is present
only when there is
onboard LAN)
• Disabled
• Enabled
(default)
Enables or disables the LAN device.
Legacy USB Support • Disabled
• Enabled
(default)
Enables or disables USB legacy support.
(See USB Support on page 13 for more information.)