Intel D845EPI Computer Hardware User Manual


 
Installing and Replacing Desktop Board Components
39
Setting the BIOS Configuration Jumper Block
Figure 13 shows the location of the BIOS configuration jumper block.
OM16296
1
3
J9H2
Figure 13. Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup.
Table 9 shows the jumper settings for the Setup program modes.
Table 9. Jumper Settings for the BIOS Setup Program Modes (J9H2)
Jumper Setting Mode Description
3
1
Normal (default)
(1-2)
The BIOS uses the current configuration and passwords for booting.
3
1
Configure
(2-3)
After the Power-On Self-Test (POST) runs, the BIOS displays the
Maintenance Menu. Use this menu to clear passwords.
3
1
Recovery
(None)
Recovers BIOS from a diskette in the event of a failed BIOS update.