Filter
Top Products
Intel Desktop Board D845EPI Product Guide
60
Primary/Secondary IDE Master/Slave Submenus
Main Advanced Security Power Boot Exit
` [ :
Xxxxxxxxx ]
Type [Auto]
Maximum Capacity [Auto]
Configuration Options
Selected By BIOS
LBA Mode : [Supported]
Block Mode : 16 Sectors
PIO Mode : Auto
Ultra DMA : Disabled
m o
Select Screen
Cable Detected : Serial
n p
Select Item
Enter
Select ` Sub-Menu
F1 General Help
P9 Setup Defaults
F10 Save and Exit
ESC Exit
There are four IDE submenus: Primary master, primary slave, secondary master, and secondary
slave. Table 19 shows the format of these IDE submenus. For brevity, only one example is shown.
Table 19. Primary/Secondary IDE Master/Slave Submenus
Feature Options Description
Drive Installed None Displays the type of drive installed.
Type • Auto (default)
• User
Specifies the IDE configuration mode for IDE devices.
Auto fills-in capabilities from ATA/ATAPI device.
User allows capabilities to be changed.
Maximum Capacity None Displays the capacity of the drive.
LBA Mode Control
(Note)
None Specifies LBA mode control.
Block Mode
• Disabled
• 2 Sectors
• 4 Sectors
• 8 Sectors
• 16 Sectors (default)
Specifies number of sectors per block for transfers from
the hard disk drive to memory.
Check the hard disk drive’s specifications for optimum
setting.
continued