Filter
Top Products
User’s Manual
60 ECB-870 User’s Manual
4.5.5.18 EPP Mode Select
Set parallel port as EPP1.7 or EPP1.9.
The choice: EPP1.7, EPP1.9.
4.5.5.19 ECP Mode Use DMA
Select a DMA channel if parallel port is set as ECP or ECP+EPP.
The choice: 1, 3.
4.5.5.20 PWRON After PWR-Fail
Select the option for the system action after an AC power failure.
Off
When power returns after an AC power failure, the system's power is
off. You must press the Power button to power-on the system.
On
When power returns after an AC power failure, the system will
automatically power-on.
Former-Sts
When power returns after an AC power failure, the system will return to
the state where you left off before power failure occurs. If the system's
power is off when AC power failure occurs, it will remain off when
power returns. If the system's power is on when AC power failure
occurs, the system will power-on when power returns.