Filter
Top Products
SBC84833 Series All-In-One Capa Board User’s Manual
JUMPERS AND CONNECTORS
29
2.4.10 Keyboard and PS/2 Mouse Connector (CN11)
The board supports a PS/2 Keyboard and Mouse interface. Connector
is a DIN connector for PS/2 keyboard Connection via “Y” Cable.
Pin Signal
1 Keyboard Data
2 Mouse Data
3 GND
4 VCC
5 Keyboard Clock
6 Mouse Clock
2.4.11 VGA Connector (CN13)
The board has three connectors to support CRT VGA and flat panel
displays, individually or simultaneously. Connector is a slim type 15-pin
D-Sub connector which is common for the CRT VGA display. The VGA
interface configuration is done via the software utility, and no jumper
setting is required.
Pin Signal Pin Signal Pin Signal
1 Red 2 Green 3 Blue
4 N.C. 5 GND 6 DETECT
7 GND 8 GND 9 VCC
10 GND 11 N.C. 12 DDC DATA
13 Horizontal Sync 14 Vertical Sync 15 DDC CLK