SBC84833 Series All-In-One Capa Board User’s Manual
JUMPERS AND CONNECTORS
35
2.4.21 CompactFlash™ Socket (SCF1)
The board is equipped with a CompactFlash
TM
disk type-II socket on
the solder side to support an IDE interface CompactFlash
TM
disk card
with DMA mode supported. The socket is especially designed to avoid
incorrect installation of the CompactFlash
TM
disk card. When installing
or removing the CompactFlash
TM
disk card, please make sure the
system power is off. The CompactFlash
TM
disk card is defaulted as the
C: or D: disk drive in your PC system.
Pin Signal Pin Signal
1 GND 26 CD1-
2 Data 3 27 Data 11
3 Data 4 28 Data 12
4 Data 5 29 Data 13
5 Data 6 30 Data 14
6 Data 7 31 Data 15
7 CS0# 32 CS1#
8 Address 10 33 VS1#
9 ATASEL 34 IORD#
10 Address 9 35 IOWR#
11 Address 8 36 WE#
12 Address 7 37 INTR
13 VCC 38 VCC
14 Address 6 39 CSEL#
15 Address 5 40 VS2#
16 Address 4 41 RESET#
17 Address 3 42 IORDY#
18 Address 2 43 DMAREQ
19 Address 1 44 DMAACK-
20 Address 0 45 DASP#
21 Data 0 46 PDIAG#
22 Data 1 47 Data 8
23 Data 2 48 Data 9
24 IOCS16# 49 Data 10
25 CD2# 50 GND