Filter
Top Products
SBC84833 Series All-In-One Capa Board User’s Manual
JUMPERS AND CONNECTORS
31
2.4.14 Power output Connector (CN8)
The CN8 can be the power supply for SATA 2.5" HD only.
2.4.15 Ethernet Connectors (LAN1)
The RJ-45 connector is for Ethernet. To connect the board to a
1000/100/10 Base-T hub, just plug one end of the cable into connector
and connect the other end (phone jack) to a 1000/100/10-Base-T hub.
Pin Signal Pin Signal
L1 MDI0+ L5 MDI2-
L2 MDI0-
L6
MDI1-
L3 MDI1+ L7 MDI3+
L4 MDI2+ L8 MDI3-
A Active LED (Yellow)
B
100 LAN LED (Green)/ 1000 LAN
LED (Orange)
2.4.16 SATA Connectors (SATA1, SATA2)
These SATA connectors are for high-speed SATA interface ports and
they can be connected to hard disk devices.
Pin Signal
1 GND
2 SATA_TX+
3 SATA_TX-
4 GND
5 SATA_RX-
6 SATA_RX+
Pin Signal
1 +12V
2 GND
3 GND
4 +5V