Filter
Top Products
SBC84833 Series All-In-One Capa Board User’s Manual
AMI BIOS SETUP UTILITY
56
¾
Suspend Time Out (Minute)
This option specifies the length of time the system waits before it
enters suspend mode. The default setting is Disabled.
Disabled
This setting prevents the system from entering
suspend mode. This is the default setting.
1 Min
Set this item to allow the computer system to enter
suspend mode after being inactive for 1 minute.
4 Min
Set this item to allow the computer system to enter
suspend mode after being inactive for 4 minutes.
10 Min
Set this item to allow the computer system to enter
suspend mode after being inactive for 10 minutes.
Throttle Slow Clock Ratio
Use this item to specify the speed of the system clock when running
the power saving states.
¾ Power Button Mode
This option specifies how the externally mounted power button on
the front of the computer chassis is used. The default setting is
On/Off.
On/Off
Pushing the power button turns the computer
on or off. This is the default setting. This is the
default setting.
Suspend
Pushing the power button places the computer
in Suspend mode or Full On power mode.
¾ *** Advanced Resume Event Controls ***
¾ Resume On Ring
This item enables or disables the function of Resume On Ring that
resumes the system through incoming calls.
¾ Resume On RTC Alarm
You can set “Resume On RTC Alarm” item to enabled and key in
Data/time to power on system.