Intel NuPRO-850 Switch User Manual


 
6 Introduction
1.3.1 Intel® Pentium® 4 Processor
The Intel® Pentium® 4 processor is based on Intel® NetBurst®
microarchitecture and built with Intel®'s 0.13-micron and 90nm manufacturing
process and featuring Hyper-Threading technology, a 1MB level two-cache
size. The Intel® Pentium® 4 has a maximum clock speed of 3.4GHz and front
side bus frequency of 400/533/800MHz.
The Intel® NetBurst™ micro-architecture and Hyper-Threading Technology is
designed specifically for multi-tasking environments and provides outstanding
performance for multi-threaded applications.
1.3.2 Video
The NuPRO-850 provides standard SVGA CRT analog output on a bracket I/O
panel. The video function is provided via an ATI Mobility M9 (AGP4X) or M10
(AGP8X) VGA chip with 64MB video memory. NuPRO-850 also supports dual
CRT output (via one onboard 14-pin header) and one LVDS interface. The
NuPRO-850 has one jumper to disable the onboard video and BIOS options
are used to select the resolution of the LVDS panel
1.3.3 Ethernet Interfaces
The NuPRO-850 provides one 10/100/1000Mbps Ethernet interface via the
Intel® 82547GI Gigabit Ethernet Controller. The 82547GI is connected to the
CSA (Communicating Streaming Architecture) interface of the 875P MCH. The
Ethernet interface is routed to a RJ-45 w/LED all-in-one connector on bracket.
The LAN chip will be assigned one unique static MAC Address. LED drive
signals for Ethernet link status and activity are routed to the same connector.
1.3.4 Serial I/O
The NuPRO-850 has one RS-232 serial port with a 10-pin connector. The
16550 compatible serial port is provided by the SIU port on the Intel® 6300ESB
ICH.
1.3.5 Universal Serial Bus (USB)
The NuRPRO-850 supports four USB 2.0 ports, with two connectors (USB0 &
USB1) on bracket and the remaining (USB2 & USB3) routed to one onboard
9-pin header. USB allows for the easy addition of peripherals such as mouse,
keyboard, speakers, etc.
1.3.6 IDE and Serial ATA Controller Controller
The NuPRO-850 provides IDE and Serial ATA interfaces from the Intel®
6300ESB ICH. Two IDE connectors can support up to four drives Ultra DMA
100 Mode. Two serial ATA ports support up to two serial ATA devices for data
transfer rates up to 150Mbps.