PX865PE7 PRO/ PX865PE7
24
Typematic Rate (Chars/Sec)
The rate at which a character repeats when you hold down a key.
、8、10、12、15、20、24、30
250 (default)、500、750、1000
version control for OS” can be configured.
OS
rsion that supports 8 more IRQs in the Windows NT environment.
u are running the OS/2 operating system with greater than 64MB of RAM.
gy that enables a PC to attempt to
ives. Options: Disabled (default)、Enabled
This item determ timing using SPD or manual configuration.
(Serial Presence Data), if you want to select the “By SPD”
lt)
mines CAS Latency installed, the number of clock
timing. Do not reset this field from the default value
Options: 6 (default)
Typematic Delay (Msec)
The delay before keystrokes begin to repeat. Options:
APIC Mode
By enabling this option, “MPS
Options: Disabled、Enabled (default)
MPS Version Control For
The 1.1 version is the older ve
Choose the new 1.4 version for Windows 2000 and Windows XP. Options: 1.4 (default)、1.1
OS Select For DRAM > 64MB
Select “OS2” only if yo
Options: Non-OS2 (default)、OS2
HDD S.M.A.R.T. Capability
Self Monitoring Analysis and Reporting Technology is a technolo
predict the possible failure of storage dr
Small LOGO (EPA) Show
This item allows you to show or hide the small LOGO EPA.
Options: Disabled、Enabled (default)
Advanced Chipset Features
DRAM Timing Selectable
ines DRAM clock/
Make sure your memory module has SPD
option. Options: Manual、By SPD (defau
CAS Latency Time
This item deter . When synchronous DRAM is
cycles of CAS latency depends on the DRAM
specified by the system engineer. This field is adjustable only when “DRAM Timing Selectable” is
set to “Manual”. This field is locked when “DRAM Timing Selectable” is set to “By SPD” and is
automatically determined by the system. Options: 2、2.5、3