Intel PXP43 Computer Hardware User Manual


 
25
System Memory
This item will show information about the memory modules(s) installed.
3-5 Advanced BIOS Features
CMOS Setup Utility-Copyright(C)1985-2009 American Megatrends. Inc.
Advanced BIOS Features
Help Item
Virus Warning Disabled
¾
CPU Feature Press Enter
¾
Removable Drives Press Enter
Quick Power on self Test Enabled
1
ST
Boot Device 1
st
FLOPPY DRIVER
Boot up Number Status On
ACPI Enabled
MPS Revision Control for OS 1.4
Specifies the Boot Device
Priority Sequence from Available
Removable Devices.
↑↓→←: Move Enter: Select +/-/: Value F10: Save ESC: Exit F1:General Help
F5: Previous Values F6: Optimized Defaults F7: Standard Defaults
Virus Warning
The selection allows you to choose the VIRUS Warning feature for IDE Hard Disk booting
sector protection. If this function is enabled and someone attempt to write data into this area,
BIOS will show a warning message on screen and alarm beep.
Disabled
(default) No warning message to appear when anything attempts to access the
boot sector or hard disk partition table.
Enabled
Activates automatically when the system boots up causing a warning
message to appear when anything attempts to access the boot sector
of hard disk partition table.
Removable Drives
Specifies the Boot Device Priority sequence from available Removable Drives.
Quick Power On Self-Test
This category speeds up Power On Self Test (POST) after you power on the computer. If this
is set to Enabled, BIOS will shorten or skip some check items during POST.
Enabled
(default)
Enable quick POST
Disabled
Normal POST
1
st
Boot Device
Specifies the boot sequence from the available device. A device enclosed in parenthesis has
been disabled in the corresponding type menu.
Boot Up NumLock Status
The default value is On.
On
(default)
Keypad is numeric keys.
Off
Keypad is arrow keys.
APIC Mode
Include ACPI APIC table pointer to RSDT pointer list.
MPS Version Control For OS 1.4
This option is only valid for multiprocessor motherboards as it specifies the version of the
Multiprocessor Specification (MPS) that the motherboard will use.