Filter
Top Products
28
3-7-3 Onboard Super IO Function
CMOS Setup Utility-Copyright(C)1985-2009 American Megatrends. Inc.
Onboard Super IO Function
Help Item
Onboard Floppy Controller Enabled
Serial Port1 Address 378/IRQ4
Serial Port2 Address Disabled
Parallel Port Address 378
Parallel Port Mode Normal
Allow BIOS to Enable
or Disable Floppy
Controller
↑↓→←: Move Enter: Select +/-/: Value F10: Save ESC: Exit F1:General Help
F5: Previous Values F6: Optimized Defaults F7: Standard Defaults
Serial Port1/2 Address
This item allows BIOS to select serial port1/2 base address.
Parallel Port Address
This item allows BIOS to select parallel port base address.
Parallel Port Mode
This item allows BIOS to set parallel mode. The optional settings are: Normal; Bi-Directional;
ECP; EPP; ECP&EPP.
3-8 Power Management Setup
The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
CMOS Setup Utility-Copyright(C)1985-2009 American Megatrends. Inc.
Power Management Setup
Help Item
ACPI Function Enabled
Video off in Suspend Yes
Suspend Mode Disabled
Soft-off by PWR-BTTN Instant-OFF
Wake-up by PCI Card Disabled
Power on By Ring Disabled
Wake-up by USB from S4 Disabled
PS2 KB/MS Wake-up from S4-S5 Disabled
Resume by Alarm Disabled
Options
Disabled
Enabled
↑↓→←: Move Enter: Select +/-/: Value F10: Save ESC: Exit F1:General Help
F5: Previous Values F6: Optimized Defaults F7: Standard Defaults
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power
Management (ACPI). The settings are Enabled and Disabled.
Video Off In Suspend
Power Down video in suspend or standly Mode.
Suspend Mode
This item is used for computer to go into suspend mode in Specified time.
Soft-Off by PWRBTN
This item is used for computer to go into in/off, or suspend mode when power button is
pressed,
Resume by Alarm
Disable/Enable RTC to generate a wake event.