Filter
Top Products
Setting the BIOS Configuration Jumper
CAUTION
Always turn off the power and unplug the power cord from the server before
changing the jumper. Moving the jumper with the power on may result in
unreliable server operation.
OM14346
J6H1
Figure 14. BIOS Configuration Jumper Block Location
This three-pin jumper block, shown in Figure 14, enables all server board configurations to be done
in BIOS Setup. Table 12 shows the jumper settings for the Setup program modes.
Table 12. Jumper Settings for the BIOS Setup Program Modes
Function/Mode Jumper Setting Configuration
Normal
1-2
1
3
The BIOS uses current configuration information and passwords
for booting.
Configure
2-3
1
3
After the POST runs, Setup runs automatically. The maintenance
menu is displayed.
Recovery
None
1
3
The BIOS attempts to recover the BIOS configuration. A recovery
diskette is required.
54 Intel Server Board S845WD1-E Product Guide