Filter
Top Products
6 Technical Reference
Server Board Connectors
CAUTION
Many of the baseboard and front panel connectors provide operating voltage
(+5 V DC and +12 V DC, for example) to devices inside the server chassis,
such as fans and internal peripherals. These connectors are not overcurrent
protected. Do not use these connectors for powering devices external to the
server chassis. A fault in the load presented by the external devices could
cause damage to the server, the interconnecting cable, and the external
devices themselves.
Baseboard Connectors
Power and Hardware Control Connectors
Figure 15 shows the power and hardware connectors.
OM14348
C
B
A
1
1
1
11
10
20
A. Processor fan
B. Power
C. Chassis fan
Figure 15. Power and Hardware Control Connectors
87