Filter
Top Products
Table 21. Peripheral Configuration Submenu (continued)
Feature Options Description
Mode
• Normal (default)
• IrDA SIR-A
• ASK-IR
Specifies the mode for serial port B.
Parallel Port
• Disabled
• Enabled
• Auto (default)
Configures the parallel port.
Auto assigns LPT1 the address 378h and the
interrupt IRQ7.
An * (asterisk) displayed next to an address indicates a
conflict with another device.
Mode
• Output Only
• Bi-directional
(default)
• EPP
• ECP
Selects the mode for the parallel port. Not available if the
parallel port is disabled.
Output Only operates in AT-compatible mode.
Bi-directional operates in PS/2-compatible mode.
EPP is Extended Parallel Port mode, a high-speed
bi-directional mode.
ECP is Enhanced Capabilities Port mode, a high-speed
bi-directional mode.
Base I/O Address
(This feature is present
only when Parallel Port is
set to Enabled)
• 378 (default)
• 278
Specifies the base I/O address for the parallel port.
Interrupt
(This feature is present
only when Parallel Port is
set to Enabled)
• IRQ 5
• IRQ 7 (default)
Specifies the interrupt for the parallel port.
DMA
(This feature is present
only when Parallel Port
Mode is set to ECP)
• 1
• 3 (default)
Specifies the DMA channel.
Keyboard Error Message
• Disabled
• Enabled
(default)
Enables or disables keyboard error reporting.
LAN#1 Controller
• Disabled
• Enabled
(default)
Enables or disables the on-board LAN#1 device.
LAN#2 Controller
• Disabled
• Enabled
(default)
Enables or disables the on-board LAN#2 device.
ATA RAID Controller
• Disabled
• Enabled
(default)
Enables or disables the on-board ATA RAID controller.
ATI Rage Video
• Disabled
• Enabled
(default)
Enables or disables the on-board ATI* Rage video
controller.
Legacy USB Support
• Disabled
• Enabled
(default)
Enables or disables Legacy USB support.
68 Intel Server Board S845WD1-E Product Guide