Filter
Top Products
Intel Server Board SE7501CW2 Installation and Integration Guide
Attaching the Wind Tunnel
1. Spread the tabs outward slightly (1a). Lower the wind
tunnel assembly onto the retention mechanism (1b).
2. The tabs on the fan assembly (2a) slide into slots (2b) on
the inner side of t
3. The tabs on fan
surface of the retent
4. Attach the fa
board CPU fan connecto
Correct assembly sh
is no need to install the wind tunnel assembly
over the second processor location. Use the wind tunnel assembly over a CPU socket only
Install the rest of the internal peripherals of your server now
the
ser
he retention mechanism.
assembly (3a) connect to the outside
ion mechanism (3b).
n power cable to the corresponding server
r.
ould look like this:
When installing only one processor, there
when a CPU is installed.
, including any floppy, CD, and
Server Board” below for the hard disk drives. See “Making Required Connections to
ver board connection points.
15