Filter
Top Products
Intel Server Board SE7501CW2 Installation and Integration Guide
Chassis Preparation and Server Board Installation
About the I/O Shield
An ATX 2.03-compliant I/O shield is provided with your server board. The shield is required
by Electromagnetic Interference (EMI) regulations. It minimizes EMI and helps obtain proper
cooling of the server.
The shield fits the rectangular opening near the power supply in the back of the chassis. The
shield has cutouts that match the external I/O connectors of the server board (such as the
keyboard and mouse connectors).
Attaching the Gasket to the I/O Shield
1. Remove the two backing strips from the gasket.
2. Press the gasket onto the inside face of the I/O shield as
shown.
Attaching the Label to the I/O Shield
1. Remove the backing from the label included with your server
board.
2. Press the label onto the outside face of the I/O shield (A).
Installing the I/O Shield
Install the I/O shield from inside the chassis, with the label facing outward.
1. Insert one edge, and rotate the I/O shield into the chassis cutout.
2. Press firmly until the I/O shield clicks into place.
9