Filter
Top Products
Intel Server Board SE7501CW2 Installation and Integration Guide
Cable Routing – Intel Server Chassis SC5200
routing guidelines below.
sys
1. bles as shown.
Floppy and Front Panel Cables
Route the floppy drive and front panel cables as
shown.
Installing the Access Cover
1. Place the cover so the tabs go into the slots on the
server. The cover should be flush against the chassis.
2. Slide the cover forward until it stops.
3. Tighten the two captive screws into the rear of the
chassis.
To ensure proper airflow within the chassis, follow the cable
IDE or SCSI Cables
Cables that connect to devices in the lower
device bays should be routed around the EPAC
tem fan carrier as shown.
Route ca
2. Replace the top half of the EPAC.
19