Filter
Top Products
Intel
®
Server System SR1680MV Service Guide 99
7 Installing the Rackmount Rail Kits
This section contains the detail instructions of installing rail kit to racks for this server.
Reverse the instillation steps to remove the rail.
The front overview and back overview of rail is shown below:
Figure 64. Overview of Rail Kit
Here are some recommended screwdrivers for your reference to secure or loosen the
corresponding screws.
Table 42.
Recommended screwdrivers
There are seven spring screw holes in rail to secure each spring. Spring secured in
different spring screw holes can fit to different depths for racks. The locations and the
adapt depth for racks are shown below:
Tighten Screw 1 Spring Secure Screw
Align Pin
Spring
Tighten Screw 2
Screw Tape
Screw Driver
Tape
Screw Tape
Screw Driver
Tape
Tighten Screw 1 TROX 25 Tighten Screw 2 Cross Point
Screwdriver
Align Pin Slotted Point
Screwdriver
Spring Secure Screw Slotted Point
Screwdriver