Filter
Top Products
Intel® Server System SR1680MV Service Guide 155
Appendix E: Regulatory and Certification
Information
Warning: To ensure regulatory compliance, you must adhere to the assembly instructions in this
guide to ensure and maintain compliance with existing product certifications and
approvals. Use only the described, regulated components specified in this guide. Use of
other products/components will void the UL listing and other regulatory approvals of the
product and will most likely result in noncompliance with product regulations in the
region(s) in which the product is sold.
To help ensure EMC compliance with your local regional rules and regulations, before
computer integration, make sure that the server system, power supply, and other modules
have passed EMC testing using a server board with a microprocessor from the same
family (or higher) and operating at the same (or higher) speed as the microprocessor used
on this server board. The final configuration of your end system product may require
additional EMC compliance testing. For more information, please contact your local Intel
representative.
This is an FCC Class A device. Integration of it into a Class B system does not result in a
Class B device.
Note: To avoid potential overloading of the Intel server system, the following electrical
components need to be used as per the ratings:
1. Maximum four Intel Xeon Processor 5500 Series.
2. Maximum four 3.5” SATA/SAS hard drives (two per server node), not exceeding
17W each.
3. Maximum two PCI add-in cards, not exceeding 25W each.
Product Regulatory Compliance
This server chassis product, when correctly integrated per this guide, complies with the
following safety and electromagnetic compatibility (EMC) regulations.
Intended Application - This product was evaluated as Information Technology
Equipment (ITE), which may be installed in offices, schools, computer rooms, and similar
commercial type locations. The suitability of this product for other product categories and
environments (such as: medical, industrial, telecommunications, NEBS, residential, alarm
systems, test equipment, etc.), other than an ITE application, may require further
evaluation.