Filter
Top Products
Intel
®
Server System SR1680MV Service Guide 9
2 Hardware Installations and
Upgrades
Before You Begin
Before working with your server product, pay close attention to “Safety Information”.
This document provides instructions for adding and replacing system components. For
instructions on replacing components on the server board, such as the processor and
memory DIMMs, and PCI-E add-in cards.
In addition, this server is also designed with the tool-less feature, which permits to remove
or install the components without any tools. The locking tab, retaining clip and so forth
provide the convenient method to lock the components on the server chassis. The tool-less
components are listed:
• Motherboard Cage Modules
• I/O Board Cage Modules
• Power Supply Module
• Power Distribution Board
• System Fans
• Air Ducts
• System Battery
• PCI Cage
• 2.5-inch Pluggable SATA HDDs
Note: The components shown in this chapter are mainly for your reference. Please take the
actual shipment as standard.
Tools and Supplies Needed
• Phillips* (cross head) screwdriver (#1 bit and #2 bit)
• Needle nosed pliers
• Antistatic wrist strap and conductive foam pad (recommended)