Filter
Top Products
High Availability Software for the Intel
®
NetStructure
TM
ZT 4901 Technical Product Specification 105
Software Installation
CONFIG_RH options also must be enabled. The Redundant Host Software is dependant on both
the Hot Swap support and IPMI drivers to be enabled.
bash# make dep
bash# make install
bash# make modules
bash# make modules.dep
A.3.4 Making RH Configuration Changes
Make any required changes to the following files located under the /usr/src/redhat directory (see
Section A.4, “Configuring the Redundant Host Infrastructure” on page 105 for more information):
To build the modules listed above, simply go to the top level build source directory (in this case the
BUILD/CompactPCI-RH-1.0 directory) and use the “make all” command at the command line
prompt.
A.4 Configuring the Redundant Host Infrastructure
A.4.1 /lib/modules/priBptd.o
The priBptd.o is a loadable backplane device driver that can be used in conjunction with the
ZT 5541 peripheral system master board to test out the Redundant Host Infrastructure
configurations. See the readme file that accompanies this driver to find out how to fully use it to
exercise your system configuration.
A.4.2 /lib/modules/slotcntrl.o
The slotcntrl.o is a loadable slot control driver that is used in association with the Intel NetStructure
ZT 7102 Chassis Management Module. This driver provides access to Hot Swap Backplane
Peripheral Device Control. In addition, this driver provides complete IPMI access to the Chassis
Management Module. See the Intel
®
NetStructure
TM
ZT 7102 Chassis Management Module
manual for a detailed description of the capabilities and configuration of this board. To install this
driver, type the following command:
insmod -f /lib/modules/misc/slotcntrl.o
BUILD/CompactPCI-RH-1.0/
BpTestDrv
Backplane driver
(see “/lib/modules/misc/priBptd.o”)
BUILD/CompactPCI-RH-1.0/SlotCntrlDrv
Slot Control driver
(see “/lib/modules/misc/slotcntrl.o”)
BUILD/CompactPCI-RH-1.0/lib
API Shared Libraries
(see “/CompactPCI-RH-1.0/app/lib”)
BUILD/CompactPCI-RH-1.0/bin
System Service and RH Demo
(see “/CompactPCI-RH-1.0/app/bin”)