Filter
Top Products
connectivity; if unlit, the connection isn’t ready. When lit, the amber
LED indicates 100 Mbps connectivity.
NOTE: If your LAN is using a network segment other than 192.168.1.xxx,
consider conguring one of the computers with an IP address of
192.168.1.xxx. The factory defaults of the switch are as follows:
Port base: 5900
IP address: 192.168.1.200
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.254
DNS: 192.168.1.1
2. Go to the Web Management interface of the switch by entering
https://<IP_address>:<PortBase+8> (e.g., https://192.168.1.200:5908)
in the address bar of your browser; then log in (username = superuser;
password = superu).
3. Go to the Main: LAN TCP/IP screen to re-congure the factory default
settings listed above. If, as an example, you establish these settings:
Port base: 6080
IP: 192.168.1.36
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.11
DNS: 192.168.1.1
7