Filter
Top Products
51
TROUBLESHOOTING
4 TROUBLESHOOTING
If you forget your password....
Press the Reset button for 5 seconds or more (with the router on) to
restore factory settings. The default username is “admin” and the
password is “1234.”
If problems arise with the cable modem connection....
Conrm that the cable modem is working properly and the signal is
stable. Normally, there will be LEDs on the modem that indicate its
operational status. If any LED indicates improper operation, contact
your ISP.
Check the LEDs on the front panel of the router. When the cable
connections are good, the PWR LED should be on and the WAN LED
should be blinking. If you use your computer, the corresponding LAN
port LED should also be blinking. If not, conrm that the cables are
good. If they check out okay, re-visit Section 3.2.4: Conguration to
make sure your conguration is correct. If you can’t access the Internet,
go to the next step
Open Internet Explorer (or another Web browser) and enter
“192.168.2.1” in the address bar, then press <Enter>. Enter “admin” in
the User Name eld and “1234” in the Password eld, then click “OK.”
Click “LAN” in the top menu, select “DHCP Server,” then click “OK”
and close the browser window.