Filter
Top Products
10
Installation
Guide
If the CD drive and hard drive are on different IDE
channels...
Follow the IDE interface cable to find out if the CD drive is the only
device connected to the secondary IDE channel. If it is, see
Installing
the Zip Drive as the Slave Device
starting on page 11 of this manual
for instructions on installing your Zip
®
drive.
IDE hard drive
IDE data cables
that extend
to the motherboard
CD drive
IDE Channels
If the CD drive and hard drive are on the same IDE
channel...
If the CD drive and the hard drive are both connected to the primary IDE
channel, the secondary IDE channel should be unused, as shown in the
following illustration. If your system has this configuration, see the section
entitled
Installing the Zip
®
drive as the only device on the secondary
IDE channel
starting on page 17 of this manual for instructions on
installing your Zip
®
drive.
IDE hard drive
IDE data cable that extends
to the motherboard
CD drive
IDE Channels
2b
2c