Filter
Top Products
Chapter 18 SNMP
ES-1528 User’s Guide
112
18.4 SNMP Community
SNMP communities are used to define the security parameters of SNMP clients in an SNMP
v1 and SNMP v2c environments. The default SNMP community is “public” for both SNMP
v1 and SNMP v2c before SNMP v3 is enabled. Once SNMP v3 is enabled, the communities of
SNMP v1 and v2c have to be unique and cannot be shared. Use the SNMP Community
screen to create SNMP communities and associate SNMP groups to them. Click SNMP >
Community to view the screen as shown.
Figure 65 SNMP Community
The following table describes the labels in this screen.
Old Key Enter the old MD5 key this user used for authentication, if you are setting up the key
for the first time, leave this field blank.
New Key Enter the new MD5 key this user must use to authenticate with the switch.
Apply Click this to save your settings to the switch.
Table 45 SNMP User - Modify (continued)
LABEL DESCRIPTION
Table 46 SNMP Community
LABEL DESCRIPTION
Community ID Select the SNMP community you want to edit.
Create New
Community
Click this to configure a new SNMP community.
Community ID This field indicates the community number. It is used for identification only. Click on
the individual community number to edit the community settings.
Community
String
This field indicates the SNMP community string.
An SNMP community string is a text string that acts as a password. It is used to
authenticate messages that are sent between the management station (the SNMP
manager) and the device (the SNMP agent). The community string is included in
every packet that is transmitted between the SNMP manager and the SNMP agent.
Remote Station
IP
This field displays the IP address of the remote SNMP management station.
Group Name This field indicates the group which is part of this SNMP community.
Previous Page/
Next Page
Use these navigation links to browse all of your SNMP groups.