Filter
Top Products
Chapter 18 SNMP
ES-1528 User’s Guide
116
18.6.1 SNMP Trap Station - Create
Click on the Create New Trap Station link in the SNMP Trap Station screen to add an
SNMP Trap Station. The screen displays as shown.
Figure 70 SNMP Trap Station - Create
The following table describes the labels in this screen.
18.6.2 SNMP Trap Station - Modify
Click on the Trap Station ID number or select a Trap Station ID from the Trap Station ID
drop down list box in the SNMP Trap Station screen to modify the settings of an existing trap
station.
Community
String
An SNMP community string is a text string that acts as a password. It is used to
authenticate messages that are sent between the management station (the SNMP
manager) and the device (the SNMP agent). The community string is included in
every packet that is transmitted between the SNMP manager and the SNMP agent.
This field displays the community string of this remote trap station.
Previous Page/
Next Page
Use these navigation links to browse all of your SNMP groups.
Table 50 SNMP Trap Station (continued)
LABEL DESCRIPTION
Table 51 SNMP Trap Station - Create
LABEL DESCRIPTION
Remote IP
Address
Enter the IP address of the remote trap station in dotted decimal notation.
Community
String
Specify the community string used with this remote trap station.
Create Click this to add this SNMP user to the switch.
Cancel Click this to go back to the main SNMP Group screen without saving your changes.