Filter
Top Products
NOTE: If the billing-code feature is enabled on the MFP, a billing-code entry is required for walk-
up fax jobs sent from the MFP.
Enable the billing code on the HP LaserJet M3035MFP, M3027MFP, M4345MFP, M5025MFP, M5035
MFP, and HP Color LaserJet CM4730 MFP and CM6040 MFP:
1. On the MFP control panel, touch Administration.
2. Scroll to and touch Initial Setup.
3. Scroll to and touch Fax Setup.
4. Scroll to and touch Fax Send Settings.
5. Scroll to and touch Billing Codes.
6. Touch Custom to open the billing-code screen.
7. Use the up and down arrows to select the minimum number of digits in the billing code.
8. Touch OK to enable the billing-code feature or touch Off to disable the billing-code feature.
NOTE: If the billing-code feature is enabled on the MFP, a billing-code entry is required for walk-
up fax jobs sent from the MFP.
Installing the driver
To install the MFP Send Fax driver by using the Add a Printer wizard in Windows, use the following
steps:
NOTE: If using the system software CD supplied with the MFP, you can install the Send Fax driver by
choosing the “CUSTOM” path.
To install the driver in Windows XP
1. In Windows Explorer, double-click the downloaded MFP Send Fax driver executable file to extract
the driver files.
2. Click Start, click Settings, and then click Printers and Faxes.
3. In the Printer Tasks pane in the Printers and Faxes window, click Add a printer.
4. In the Add Printer Wizard welcome dialog box, click Next.
ENWW Installing the MFP Send Fax driver 9