Manual Stair Robot SR1750 HE
Publication: 29-07-04
AATA INTERNATIONAL B.V.
6 Trouble shooting chart
The stairrobot SR 1750 HE is designed and built to function for several years with little
maintenance. In case a problem occurs please make the following checks. If the problem
continues to exist please contact your local dealer
Symptom
Possible course
Solution
• Main motor does
not work
• No current
• Check electrical wires
and connections
• Check magneto
switches
• Check capacitors
• Hydraulic pump-
motor does not
work
• No current
• Check electrical wires
and connections
• Check magneto
switches
• Check capacitors
• Main motor stops
• Motor overheated
• Wait several minutes
• Hydraulic pump-
motor stops
• Motor overheated
• Wait several minutes
• Hydraulic platform
does not lift
completely
• Possible oil-shortage
• Refill oil with spindle oil;
check oil in oil-tank;
should be 5 mm under
the top of the tank
• Hydraulic platform
does not go down
• Pressure relieve valve
• Electro-magneto switch
does not work properly
• Open valve by turning it
counter clockwise,
move the platform up
and down a few times;
adjust the valve to the
weight of the load
• Check electrical wiring
and connections
Page 20 of 28