Filter
Top Products
31
TITLE IMPOSE
Seven different titles including Congratulations! are
stored in the printer and can be called up for
superimposed printing. Colors and positions of the
titles are set in advance.
Preparation
●See page 12.
●Press INPUT SELECT to select the appropriate input mode
depending on the connection to the source unit (੬ page 18).
1
BEGIN SOURCE PLAYBACK
2
1
PRESS MEMORY WHEN THE
DESIRED IMAGE APPEARS
•If the image is unstable, press
MEMORY again.
2
PRESS OK
3
PRESS MENU
4
PRESS CURSOR TO SELECT
TITLE, THEN
PRESS OK
•If IrDA (INFRARED) or PC MODE is selected, you do not have to perform steps
1
and
2
. Refer to page
20 or 38 to send the image you want to print to the printer.
● If you want to print a different image…
Follow the instructions below to erase the title before printing.
1 Perform steps
3
–
6
described above, selecting the blank frame in the upper left corner
of the screen in step
5
.
2 Press SOURCE/STORED IMAGE to switch back to the input display.
The title is now erased.
● You can use frame impose (
੬ page 32) and title impose at the same time. Perform frame
imposing first, then title imposing.
5
PRESS CURSOR TO SELECT
THE
DESIRED
TITLE
6
PRESS OK
•The image appears on screen with the
selected title superimposed on it.
•If you want to cancel and try again,
press MENU.
7
PRESS OK
8
PRESS PRINT TO START
PRINTING
MENU 2 2/2
EFFECT
TITLE
FRAME
QUALITY :
૽STD HIGH
PICTURE MEMORY
TO MENU 1
[ ]
ITEM
[
/
]
OK [OK]
SELECT
[
/
]
QUIT [MENU]
SEL [ / ]
OK [OK]
QUIT
[MENU]