Filter
Top Products
38
HOW TO MAKE CONNECTIONS WITH A COMPUTER
By connecting the printer to your computer and using the provided image transfer software, you
can manipulate images more easily and process/print them with higher picture quality.
CONVENIENT FUNCTIONS (cont.)
PC
VIDEO OUT
1
PRESS INPUT SELECT TO SELECT
PC MODE
•The PC lamp lights up.
•If you select PC MODE when a source
unit is connected to the printer’s VIDEO
INPUT connector, the picture input from
the VIDEO INPUT connector appears
on the screen.
2
TRANSMIT VIDEO DATA IN THE
COMPUTER TO THE PRINTER
•For details, refer to the instruction
manual of the provided image transfer
software.
•While video data are being transmitted:
the PC lamp blinks.
•While video data are being converted:
the PRINT lamp blinks.
Preparation
● Install the provided image transfer software in your computer.
● Connect the printer to the computer.
Windows
ᮋ
PC connection
cable (D-sub 9-pin for
PC/AT-compatibility)
To RS-232C connector
To video input connector
To PC connector
Macintosh
ᮋ
connection cable
To the modem or
printer port
Printer
To PC connector
To video output
connector
TV
(Set the input select switch
to VIDEO)
Rear panel
connectors
● You can also save images on the
computer that are stored in the printer
and ready for printing by clicking on the
Save All button in the Album window of
the provided image transfer software.
● It is recommended to transmit video data
to the computer
before printing; if you
transmit video data to the computer after
you finish printing, the picture quality
may be changed.
3
WHEN THE PRINT LAMP STAYS
LIT, PRESS PRINT TO START
PRINTING