Filter
Top Products
E-19
English
The recalled settings upon power up or when the [USER] button is pressed can be registered.
Saving the Settings (User Setting Registration)
1.
Adjusting the camera
● Adjust the camera to the settings to be registered.
● The following user settings are possible. ( ) are factory settings.
• Zoom position (Approximately A4 portrait position)
• Lighting status (Both side illuminations light up)
• White Balance (Value corresponding to side illumination)
• Nega/Posi (Posi)
• Black & White/Colour (Colour)
•Text (OFF)
2.
Press the [SAVE] button for more than
2 seconds
● The button indicator lamp will light up initially before blinking. It
will go off once the writing process has been completed.
● The written settings will be retained even if the power is turned
off.
1.
Press the [USER] button
● The registered settings will be activated.
1.
Press the [DEFAULT] button
● The factory settings will be restored.
2.
Press the [SAVE] button for more than
2 seconds
● The button indicator lamp will light up initially before blinking. It
will go off once the writing process has been completed.
USER
USER
SETUP
DEFAULT
SAVE
WHITE BALANCE
RED BLUE
AUTO
CAMERA
PICTURE MEMORY
123
NEGA POSI
BW COLOUR
TEXT
MICROSCOPE
Ⅵ Registration
Ⅵ Recalling the settings
Ⅵ Undo the settings
(Restoring the factory settings)
Button Indicator
Lamp