Filter
Top Products
E-23
English
1
[CAMERA]
To output the camera images.
(☞ Page 6 5 [SOURCE SELECT] Buttons)
2
[FREEZE]
To make the camera image still.
(☞ Page 6 4 [FREEZE] Button)
3
[EXT-IN]
The images of the device connected to the [EXT INPUT] terminal
will be outputted.
(☞ Page 6 5 [SOURCE SELECT] Buttons)
4
[SD CARD]
To perform functions related to SD card.
● While displaying images from other sources, SD selection mode
will be activated if this button is pressed.
(☞ Page 6 5 [SOURCE SELECT] Buttons)
5
[BRIGHT]
To adjust the brightness of the camera image.
(☞ Page 6 2 [BRIGHT] Adjustment Buttons)
6
[FOCUS]
To adjust the focus of the camera image.
(☞ Page 6 3 [FOCUS] Button)
7
[ZOOM]
To reduce or enlarge the camera image.
(☞ Page 6 1 [ZOOM] Adjustment Buttons)
8
[AUTO WHITE]
To adjust the white balance automatically.
(☞ Page 7 $ [WHITE BALANCE] Adjustment Buttons)
*For details on the various functions, refer to page 6.
Operating the Remote Control Unit
The following functions are available with the use of the remote control unit.
Ⅵ Remote control receiving range
The receiving range is about 5m.
The vertical plane is ± 15˚ and the horizontal plane is ± 30˚.
CAMERA FREEZE EXT-IN
AUTO
AUTO
AUTO
WHITE
BRIGHT
IMAGE SEL.
FOCUS
OUT IN
SD CARD
ZOOM
31 2
4
5
6
7
8
Up down ± 15˚
Left right ± 30˚
5m