Filter
Top Products
41
Operating the Main Menu
ENGLISHDEUTSHFRANÇAISITALIANOESPAÑOL
DLA-M5000CLE (Re)/ LCT0979-002A / ENGLISH
Setting and Adjusting Other Functions (OPTIONS) (Cont.)
■ Remote control unit
■ Submenu items
Notes
• The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.
• Items to be set (adjusted) are different when AV signals are
input and when computer-system signals are input.
• When you turn the RESIZE function ON, allowing the
screen to be enlarged virtually to its full size for projection
(resizing display), the video image (resolution) becomes
coarse.
5
Press MENU/ENTER toward the 2 or 3
mark to select an item to set (adjust).
• To adjust multiple items, repeat steps 4 and 5.
PAGE BACK button
MENU/ENTER button
M
E
N
U
/
E
N
T
E
R
QUICK
ALIGN.
AV HIDE
OPERATE
PRESET
AV
SHIFT ZOOM FOCUS
LENS
UT
+
DW
–
RGB/COMPUTER
LENS
LOCK UNLOCK
PAGE BACK
OPTIONS
MENU AUTO OFF
LINE DISPLAY
RIGHT LEFT REV.
TOP BOTTOM INV.
CLAMP
RESIZE
BACK COLOR
COLOR TEMP.
ASPECT CHANGE
SLEEP TIME
LAMP TIME
NO
ON
OFF
OFF
BP
ON
BLUE
MIDDLE
4:3
0 Min.
10 H.
[OPTIONS menu]
Adjustment
item
Button Adjustment content
MENU
AUTO OFF
2
/
3
Sets whether to clear the menu
display automatically a fixed time
later or not.
(Factory setting: NO)
YES:
Clears the display
automatically in about 25
seconds.
NO:
Does not clear the display
automatically.
NO
j
YES
LINE
DISPLAY
2
/
3
Sets whether to show the line
display (Y/C, VIDEO, etc.) at the top
of the projected screen or not.
(Factory setting: ON)
OFF:
Does not show the line
display.
ON:
Shows the line display. (The
line display disappears
about 5 seconds after it is
shown.)
OFF
j
ON
RIGHT
LEFT REV.
2
/
3
Reverses video image right-to-left.
(Factory setting: OFF)
OFF:
For the front method
ON:
For upside hanging from the
ceiling
OFF
j
ON
TOP
BOTTOM
INV.
2
/
3
Inverses video image upside-down.
(Factory setting: OFF)
OFF:
For normal set-up
ON:
For upside hanging from the
ceiling
OFF
j
ON
CLAMP
2
/
3
Sets the clamp pulse’s position at
the back porch (BP) or on the sink
tip (ST). Normally, the clamp is used
at BP. If, with some PCs or
workstations, the screen becomes
unstable such as being too dark or
too bright, try to switch to ST.
(factory setting: BP)
BP:
The clamp pulse is
positioned at the back porch.
ST:
The clamp pulse is
positioned on the sink tip.
BP
j
ST
RESIZE
2
/
3
When the number of pixels
(resolution) sought by the input
video is smaller than that
(resolution) of D-ILA device, the
video image is then enlarged to
virtually full screen size of D-ILA
device and projected (resizing
display). (Factory setting: ON) Does
not work (cannot be set) for video
system input.
OFF:
Does not enlarge the video
image for projection. When
the number of pixels sought
by video image is smaller
than that of D-ILA device,
projection takes place on a
small screen size with a
black area around the
screen.
ON:
Enlarges virtually to the full
screen size of D-ILA device
for projection (resizing
display).
OFF
j
ON
(To be continued on the next page)
DLA-M5000LE&SCE Eng Re.book Page 41 Tuesday, March 12, 2002 3:59 PM