Filter
Top Products
42
Operating the Main Menu
DLA-M5000CLE (Re)/ LCT0979-002A / ENGLISH
Setting and Adjusting Other Functions (OPTIONS) (Cont.)
■ Remote control unit
■ Submenu items
Notes
• The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.
• Items to be set (adjusted) are different when AV signals are
input and when computer-system signals are input.
■ To return to the main menu, press the PAGE
BACK button. To finish the main menu,
press PAGE BACK again.
• To finish the menu display from the submenu display
(options menu), press PAGE BACK twice.
Note
• When you view a conventional (normal) 4 : 3 video picture,
which is not wide video picture, on the projector’s screen
the aspect change function, the upper and lower parts of
the video picture become partially invisible. View such an
original video picture in 4 : 3 mode, respecting the
producer’s intention.
PAGE BACK button
MENU/ENTER button
M
E
N
U
/
E
N
T
E
R
QUICK
ALIGN.
AV HIDE
OPERATE
PRESET
AV
SHIFT ZOOM FOCUS
LENS
UT
+
DW
–
RGB/COMPUTER
LENS
LOCK UNLOCK
PAGE BACK
OPTIONS
MENU AUTO OFF
LINE DISPLAY
RIGHT LEFT REV.
TOP BOTTOM INV.
CLAMP
RESIZE
BACK COLOR
COLOR TEMP.
ASPECT CHANGE
SLEEP TIME
LAMP TIME
NO
ON
OFF
OFF
BP
ON
BLUE
MIDDLE
4:3
0 Min.
10 H.
[OPTIONS menu]
Adjustment
item
Button Adjustment content
BACK
COLOR
2
/
3
Sets background color when there is no
input signal. (Factory setting: BLUE)
COLOR
TEMP.
2
/
3
Sets the color temperature of the video
image being projected. Make adjustment
when the image becomes reddish or
bluish. (Factory setting: MIDDLE)
LOW:
Color temperature
decreases (video image
becoming reddish).
MIDDLE:
Results in middle color
temperature.
HIGH:
Color temperature increases
(video image becoming
bluish).
ASPET
CHANGE
2
/
3
Sets the vertical-to-horizontal ratio (4 : 3
or 16 : 9) of the video image projected.
(Factory setting: 4 : 3)
4 : 3:
The aspect ratio of the
screen becomes 4 : 3. Set it
to 4 : 3 for video of NTSC,
NTSC4.43, PAL, SECAM.
16 : 9:
The aspect ratio of the
screen becomes 16 : 9. Set
it to 16 : 9 for Hi-Vision
devices (W-VHS VCR, etc.)
4 : 3
j
16 : 9
SLEEP
TIME
2
/
3
Sets the length of sleep time which
automatically brings the projector into
stand-by state. You can select one of the
following sleep times: 10 minutes, 20
minute, 30 minutes, 60 minutes and 0.
(Factory setting: 0 minutes)
If set to “0” minutes, this function does
not work.
BLUE CYAN
BLACK GREEN
YELLOW
RED
MAGENTA
LOW
MIDDLE HIGH
10 20 60 030
DLA-M5000LE&SCE Eng Re.book Page 42 Tuesday, March 12, 2002 3:59 PM