Filter
Top Products
25
Basic Operations
■ Projector’s buttons
■ Remote control unit
OPERATE button
MAIN POWER switch
Projector’s indicator
2, 1
1, 2
Remote control unit
Projector
or
Example of the projector’s button Projector
Projector
OPERATE button
2, 1
1. Turning on the Power
STAND BY indicator
OPERATE indicator
* Do not turn off the MAIN POWER switch during cool
down mode (the STAND BY indicator blinking). About
10 minutes after the STAND BY indicator comes on
steady (stand-by mode), the cooling fans (except the
one for the light-source lamp power supply) will stop,
and then turn off the MAIN POWER switch.
\
STAND BY
OPERATE
LAMP
EMERGENCY
AV
RGB
TEMP
STAND BY
OPERATE
OPERATE
OPERATE
STAND BY
STAND BY
M
E
N
U
/
E
N
T
E
R
QUICK
ALIGN.
AV HIDE
OPERATE
PRESET
AV
SHIFT ZOOM FOCUS
LENS
UT
+
DW
–
RGB/COMPUTER
LENS
LOCK UNLOCK
PAGE BACK
The following describes the basic procedure for normal use of
the projector.
1 Turn on the MAIN POWER switch
of the projector.
ON [ ❙ ]:The main power turns on and the STAND BY
indicator comes on.
2 Press the OPERATE button for one
second or more.
(Or press the remote control’s
OPERATE button for one second
or more.)
• The OPERATE indicator comes on.
• About 30 seconds after the MAIN POWER switch is
turned on, you can start projecting.
Note
• After the power is turned on, the screen may be jumbled for a few
seconds, but this is not a malfunction.
■ Turning off the Power
1 Press the OPERATE button for one
second or more.
(Or press the remote control’s
OPERATE button for one second
or more.)
• The STAND BY indicator changes to blinking, and the
projector goes into cool-down mode.
2 Turn off the MAIN POWER switch
after the cooling fans have
stopped running.
OFF [
‡‡
‡‡
‡]: The MAIN POWER switch turns off and the
STAND BY indicator goes off.
M4000LU p.25-32./1 00.2.23, 10:52 AM25