JVC DT-V9L3DY Computer Monitor User Manual


 
9
ENGLISH
7 Available signals
The following signals are available for this monitor.
Video signals
No. Signal name
Signal format shown
in the status display
( page 7)
Input terminal
VIDEO/COMPONENT
E. AUDIO HD/
SD SDI*
1
VBS
(Composite)
Y/PB/PR
(Analog component)
1 NTSC*
2
NTSC
——
2 PAL PAL
——
3 B/W50 PAL
——
4 B/W60*
2
NTSC
——
5
480/60i 480/60i
6 480/59.94i*
2
480/59.94i
√√
7 576/50i 576/50i
√√
8
480/60p 480/60p
9 480/59.94p 480/59.94p
10 576/50p 576/50p
11 720/60p 720/60p
√√
12 720/59.94p 720/59.94p
√√
13 720/50p 720/50p
√√
14 1080/60i 1080/60i
√√
15 1080/59.94i 1080/59.94i
√√
16 1035/60i 1080/60i *
3
*
3
17 1035/59.94i 1080/59.94i *
4
*
4
18 1080/50i 1080/50i
√√
19 1080/30psF 1080/60i *
3
*
3
20 1080/25psF 1080/50i *
5
*
5
21 1080/29.97psF 1080/59.94i *
4
*
4
22 1080/24psF 1080/24psf
√√
23 1080/23.98psF 1080/23.98psf
√√
: Acceptable
—: Not acceptable
*
1
Compatible with EMBEDDED AUDIO signals
*
2
When the number of vertical scanning lines of the incoming signal is 483, the picture is displayed with 480 lines.
*
3
The signal is recognized as 1080/60i.
*
4
The signal is recognized as 1080/59.94i.
*
5
The signal is recognized as 1080/50i.
• Analog component signals are compatible with Y on sync signals.
Attaching the Power Cord Holder
The provided power cord holder prevents accidental disconnection of the AC power cord from the AC IN
terminal.
• The power cord holder consists of two parts, a case and a cover.
1
CAUTION
Use only the provided screws.
2
3
CAUTION
Make sure the plug will not be pulled out after the
cover is attached to the case.
To detach the cover
AC IN terminal
Cover
Case
DT-V9L3D_EN.indd 9DT-V9L3D_EN.indd 9 09.7.23 10:33:57 AM09.7.23 10:33:57 AM