32
ERROR MESSSAGES
CLOSE DOOR
PAPER JAM
POWER OFF/REMOVE PAPER
LOAD INK SHEET
REMOVE PAPER
HIGH TEMPERATURE
WAIT A WHILE
MEMORY FULL
STOP PLAYBACK MACHINE
NO SIGNAL
NOW PRINTING
NO IMAGE IN MEMORY
ⅷ When the lid is not securely closed.
Ⅵ Press PUSH to close the lid (੬ pg. 10).
ⅷ When a print sheet or the ink sheet is caught inside
the printer.
Ⅵ Open the lid, remove the ink sheet cartridge, then
remove the problem sheet (੬ pg. 10).
ⅷ There is no ink sheet cartridge installed, or the one
installed is used up.
Ⅵ Install an ink sheet cartridge (੬ pg. 10).
ⅷ When you turn on the power and there is a print
sheet inside the printer.
Ⅵ Open the lid and remove the print sheet (੬ pg. 10).
ⅷ When the printer’s temperature gets too high and
printing becomes impossible.
Ⅵ Turn off the power, wait a few minutes and then turn
it on again.
Confirm that the error message has disappeared
before trying to use the printer.
ⅷ When you press MEMORY after having stored the
selected number of snapshots, or when you have
stored 8 Edit-In and 8 Edit-Out points.
Ⅵ Start printing, or access the Mode Select Menu
screen (੬ pg. 27).
ⅷ When you have stored the selected number of
snapshots.
Ⅵ Start printing, or access the Mode Select Menu
screen (੬ pg. 28).
ⅷ When you press MEMORY without having
connected an image source.
Ⅵ Make sure the image source is properly connected,
then engage its Play mode [or Record mode if using
a camcorder].
ⅷ When printing is being performed.
Ⅵ Disappears when printing is finished.
ⅷ When you try to print without having stored a
scene.
Ⅵ Remove the print sheet, then store a scene using any
of the described methods.
Message
ⅷ Appears in this situation
Ⅵ How to clear indication