Filter
Top Products
48
USER1
HD1035i_R
HD1035i_Y
(USER1)
SOURCE
SOURCE
(SXGA1)
AUTO
NTSC(480i)
SDTV(480p)
HDTV(720p)
HDTV(1080i)
PAL/SECAM
PC-98
VGA1
VGA3
MAC13
VGA VESA
SVGA1
SVGA2
MAC16
XGA1
XGA2
MAC19
MAC21
SXGA1
SXGA2
SXGA3
USER
SOURCE
(SXGA1)
AUTO
NTSC(480i)
SDTV(480p)
HDTV(720p)
HDTV(1080i)
PAL/SECAM
PC-98
VGA1
VGA3
MAC13
VGA VESA
SVGA1
SVGA2
MAC16
XGA1
XGA2
MAC19
MAC21
SXGA1
SXGA2
SXGA3
USER
OPERATE
VOL.
PAGE
BACK
PRESET
ZOOM FOCUS
COMPUTER VIDEO
QUICK
ALIGN.
AV
MUTING
W
T
MENU/ENTER
MENU/ENTER
button
Cursor buttons
PAGE BACK button
Operating the Main Menu (Cont.)
Changing (Setting) the Source (Cont.)
5
Press the MENU/ENTER button to set
(fix) it.
■ When AUTO is selected:
The main menu is automatically cleared, completing the
setting procedure, and the source display inputted appears.
• Both line display and source display appear on the screen
and disappear in five seconds. However, they do not appear
if the line display is set to OFF.
■ Remote control unit
■ Submenu item
Notes
• The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.
• Items that can be set are different when video signals are
input and when computer signals are input.
• For dedicated source signals (corresponding frequency, etc.)
for computer signals, see page 19.
• To finish the menu display, press PAGE BACK Button twice
(or three times).
■ When a dedicated source mode is selected :
The selected item is shown in ( ) below the displayed text
of “SOURCE” on the upper part of the screen.
▲
(SOURCE menu)
SOURCE
(SXGA1)
AUTO
NTSC(480i)
SDTV(480p)
HDTV(720p)
HDTV(1080i)
PAL/SECAM
PC-98
VGA1
VGA3
MAC13
VGA VESA
SVGA1
SVGA2
MAC16
XGA1
XGA2
MAC19
MAC21
SXGA1
SXGA2
SXGA3
USER
CH: 1
COMP 2 SXGA1
SOURCE
(SXGA1)
AUTO
NTSC(480i)
SDTV(480p)
HDTV(720p)
HDTV(1080i)
PAL/SECAM
PC-98
VGA1
VGA3
MAC13
VGA VESA
SVGA1
SVGA2
MAC16
XGA1
XGA2
MAC19
MAC21
SXGA1
SXGA2
SXGA3
USER
Source
■ When USER is selected :
The “USER SOURCE SETUP” menu is displayed.
• This menu is used when registering and using special video
signals that cannot be adjusted in “AUTO” mode or dedi-
cated source mode, using “USER SOURCE SETUP” (see
page 58).
• When the projector was shipped from the factory,
“HD 1035 i _ R” and “HD1035 i _ Y” were already registered.
1. Press the cursor buttons to select a setting.
2. Press the MENU/ENTER button to set.
• When a user source is selected, the source setting of the
projector switches to a setting registered in the user source.
G20U p.35-59 99.12.17, 10:34 AM48