Filter
Top Products
Setting Up of USB Port Replicator (MP-PRX1GB)
Installing the device driver
Note
● Log on to the computer using user with administrator privilege to install.
● If the setting for "Driver Signing Options" is set to "Block", then the device driver
cannot be installed. Change the "Driver Signing Options" settings.
1. Turn the PC’s power on.
2. Connect ths unit to the PC.
The unit’s power is automatically turned on, and the
POWER Indicator lamp turns green.
[Welcome to the Found New Hardware Wizard] screen
is displayed.
3. Check the drive display.
GWU2E
4. Select [Install from a list or specific location] and click
[Next].
[Please choose your search and installation options] is
displayed.
5. Select [Search for the best driver in these locations].
6. Select [Include this location in the search] and enter
C:\Drivers\PR and click [Next].
Printed in Taiwan
0802HNY
*
IDASS
LE 40951-001A
7. [Hardware Installation] screen is
displayed. Confirm the displayed drive
and click [Continue Anyway].
Message "The software you are installing
for this hardware…has not passed Win-
dows Logo testing to verify its compalibiliy
with Windows XP" is displayed, however,
this does not affect operation.
8. The device driver is installed and the
[Completing the Found New Hardware
Wizard] is displayed.
Click [Finish].
nageE03 2/25/3, 7:35 PM1