Filter
Top Products
24 EN
JVC ORIGINAL SOFTWARE AND SYSTEM APPLICATIONS
JVC ORIGINAL SOFTWARE
To use the JVC original software, you must set it up in the "Original Software Setup Procedure"
given below. You can setup the following software programs.
Setup software
• CC converter (See Page 27.)
• JVC’s DVC (Digital Video Camera) utilities
Tips
• The JVC’s DVC utilities are USB drivers dedicated to GR-DV4000EK, DV3500EK, DV3000EK,
DV2000EK, DV700EK, DV600EK, DV500EK, DV400EK, DX300EK, DX100EK, DX95EK,
DX75EK, DX70EK, DX60EK, DX55EK, DX35EK, DX25EK, DV70EK, DV60EK, D50EK,
D40EK, DVP9EK, DVP8EK, DVP7EK and DVP3EK systems. If you are using any of these
DVC’s, you can use it without uploading its USB driver from the DVC’s CD-ROM disk.
• For DVC connection and operations, see its instruction manual.
Setup of JVC Original Software
Before starting the software setup, quit and save the currently active application if any. Otherwise,
your working data will be lost.
1. Click [start] and click [Run first] at the right lower end of the Menu.
The "Preparing to Install
...
" screen will appear, and the software setup will start up.
2. Read the License Agreement when displayed.
If you accept the Agreement, click [Yes]
3. During setup, the "Sound, video and game controllers has not passed Windows
Logo testing to verify its compatibility with Windows XP." message may be displayed.
Ignore it as it does not affect the system operation. Click [Continue Anyway] to
continue software setup.
XP72305230E_23_33 2/25/3, 5:44 PM24