Filter
Top Products
E-45
Basic Operation
◆ Setting 1
<Setting 1 Menu>
NOTE
In the “Setting 1” menu, the currently set input signals and lamp usage time can be displayed for confirmation.
◆ Setting 2
<Setting 2 Menu>
Menu Item
Auto power off
Start-up display
Economy mode
Setting Item
ON/OFF
ON/OFF
ON/OFF
Description
Sets the auto power off function ON/
OFF. When auto power off is set to
ON, the projector automatically
goes to standby mode if no signals
are input for a fixed period of time
(about 15 minutes).
Sets whether or not to display the
Logo while the lamp is on.
Sets the lamp in Economy mode.
Standard Return
Setting 1
Auto power off
ON / OFF
Start-up display
ON / OFF
Economy mode
ON / OFF
Lamp usage time
Input signal
24H
1024 x 768 / 48.6KHz 60Hz
Standard Return
Setting 2
Pointer type
RGB-OUT select
PC · OHP / OHP
Mute mode
Black / Logo
Menu Item
Pointer type
RGB-OUT
select
Mute mode
Description
Selects a type of pointer from
among the three types.
When PC·OHP is selected:
If the input selection is OHP, then the
image is output as an OHP image for
which the timing is changed to (XGA
60Hz) on page E-23.
If the input selection is personal
computer/video, then the personal
computer image is a straight
through output.
When OHP is selected:
No matter what input selection is
made, OHP images are output at
(XGA 60Hz) timing on page E-24.
Sets the image to be displayed
when the projected image is muted.
When black is selected:
The entire projected image appears
black.
When Logo is selected:
Logo is displayed.
Setting Item
/ /
PC·OHP/
OHP
Black/Logo