Filter
Top Products
47
Chapter 6
Battery Charging Lights
Light Status Cause Action/Solution
No lights Camera is not on the printer dock
or is improperly seated.
Place the camera on the
printer dock (page 14) or
readjust the camera
placement.
Camera is turned on. Turn off the camera.
Correct battery is not installed. Install a Kodak EasyShare
Ni-MH rechargeable battery
pack (page 11).
Green lights
Battery is less than half charged. Camera is on the dock.
Leave camera on the dock
to continue charging.
Battery is more than half charged.
Battery is fully charged. Leave camera on the dock
to maintain charge.
Red light
(blinking)
Battery is not properly installed. Re-install the battery.
Battery or connector pin is
damaged.
Check for damage.
Camera and battery have been
exposed to extreme
temperatures.
Slowly return the camera
and battery to room
temperature.
urg_00170.book Page 47 Thursday, August 14, 2003 7:20 AM