Filter
Top Products
NovaJet 500/630/700 Series Service Manual
ASSEMBLY/
DISASSEMBLY
Assembly\Disassembly 5-47
ATTACH SPRING
TO POST
ON BRACKET
Figure 5-26. Stepper Motor Removal/Installation.
14. Remove the hardware securing the Stepper Motor to the Left
Lower Drive Shaft Bracket and remove the Stepper Motor.
Install the Lower Roller Assembly, Stepper Motor
and Vacuum Fan
1. Loosely attach the Stepper Motor to the Lower Roller bracket
using Stepper Motor hardware as shown in Figure 5-26.
2. Attach the Stepper Motor tension spring to the Stepper Motor and
the Lower Roller Bracket. Tighten the Stepper Motor hardware to
8 in-lb of torque.