Filter
Top Products
NovaJet 500/630/700 Series Service Manual
MAINTENANCE
Maintenance 3-31
Deadband Test
Slow Db Test
Single Line Test
All Lines Test
Deadband
Slow Deadband
Exit
*
Figure 3-25. Calibration (Deadband) Menu (500 Series).
Deadband Test
Slow Db Test
Single Line Test
All Lines Test
Slow Deadband
Exit
*
Figure 3-26. Calibration (Deadband) Menu (630/700 Series).
5. When the plot is complete, select “Slow Deadband” at the
Calibration Menu. This brings up the options menu for the
slow deadband adjustment. This menu is similiar to the
menu depicted in Figure 3-21.
6. Observe the plot and using either “Prev Option” or “Next
Option”, rotate through the selections until the value you
want is selected. Press “Ok” to accept the selection and
return to the Calibration Menu.
7. Continue performing steps 4 through 6 until the slow
deadband adjustment is correct.